Skip to main content

Changes to Step #4

Edit by Megan Buck

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Push the black clip holding the ribbon,ribbon out of its casing using the plastic opening tool.
[* black] Push the black clip holding the ribbon,ribbon out of its casing using the plastic opening tool.
[* black] This is done using the spudger to lift one side out of its housing.
[* black] Reposition the spudger to the other side of the black clip and push it flush with the other end.
[* black] Note: The black clip pushes out of the housing (insert length) and does not come completely loose.
[* black] Note: The black clip pushes out of the housing (insert length) and does not come completely loose.