Skip to main content

Changes to Step #1

Edit by marisol ramirez

Edit approved by marisol ramirez

Deleted
Added
Unchanged

Step Lines

[* red] Locate the 2 connection ribbons attaching the lens to the circuit boardboard.
[* black] Using a finger nail , gently pry up on the top of the connectors marked in redred.
[* icon_caution] The connectors are hinged and will fold up and away from the ribbon, do not disconnect completelycompletely.
[* orange] With the hinged connectors folded carefully pull the ribbons out of their connectorsconnectors.
[* red] Locate the 2 connection ribbons attaching the lens to the circuit boardboard.
[* black] Using a finger nail , gently pry up on the top of the connectors marked in redred.
[* icon_caution] The connectors are hinged and will fold up and away from the ribbon, do not disconnect completelycompletely.
[* orange] With the hinged connectors folded carefully pull the ribbons out of their connectorsconnectors.