Skip to main content

Changes to Step #1

Edit by Richard Suovanen

Edit approved by Richard Suovanen

Deleted
Added
Unchanged

Step Lines

[* redblack] Locate the 2 connection ribbons attaching the lens to the circuit board.
[* orangered] Using a plastic opening tool or finger nail, gently pry up on the top oflift the connectors marked in redZIF connector flaps up.
[* redblack] Locate the 2 connection ribbons attaching the lens to the circuit board.
[* orangered] Using a plastic opening tool or finger nail, gently pry up on the top oflift the connectors marked in redZIF connector flaps up.
[* icon_caution] The connectors are hinged and will fold up and away from the ribbon, do not disconnect completely.

Image 2

Old Version

New Version