Skip to main content

Changes to Step #1

Edit by Kailee Poe

Edit approved by Kailee Poe

Deleted
Added
Unchanged

Step Lines

[* red] Locate the 2 connection ribbons attaching the lens to the circuit board.
[* orange] Using a plastic opening tool or finger nail, gently pry up on the top of the connectors marked in red.
[* icon_caution] The connectors are hinged and will fold up and away from the ribbon, do not disconnect completely.
[* yellow] With the hinged connectors folded carefully pull the ribbons out of their connectors.

Image 3

Deleted