Skip to main content

Changes to Step #1

Edit by Kylan Hennessy

Edit approved by Kylan Hennessy

Deleted
Added
Unchanged

Step Lines

[* red] Locate the 2 connection ribbons attaching the lens to the circuit board.
[* black] Using a plastic opening tool or finger nail nail, gently pry up on the top of the connectors marked in red.
[* black] Using a plastic opening tool or finger nail nail, gently pry up on the top of the connectors marked in red.
[* icon_caution] The connectors are hinged and will fold up and away from the ribbon, do not disconnect completely.
[* orangeyellow] With the hinged connectors folded carefully pull the ribbons out of their connectors.
[* orangeyellow] With the hinged connectors folded carefully pull the ribbons out of their connectors.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added