Skip to main content

Changes to Step #1

Edit by Kylan Hennessy

Edit approved by Kylan Hennessy

Deleted
Added
Unchanged

Step Lines

[* black] Locate the 2 connection ribbons attaching the lens to the circuit board
[* black] Using a finger nail or plastic opening tool, gently pry up on the top of the connector as show.connectors marked in red
[* black] Using a finger nail or plastic opening tool, gently pry up on the top of the connector as show.connectors marked in red
[* icon_caution] The connectors are hinged and will fold up and away from the ribbon, do not disconnect completely

Image 1

Old Version

New Version

Image 2

No previous image

Added