Changes to Step #3
Edit by Ocean Yamaha —
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the camera data cable and right speaker to the upper case: |
| [* red] Two 8 mm Phillips screws. |
| [* orange] One 4mm Phillips screw. (The bottom-most screw in the photo to the left) |
| [* orange] One 4mm Phillips screw. (The bottom-most screw in the photo to the left) |
| [* black] Slide the camera cable bracket out from under the subwoofer and remove it from the computer. |
| [* black] Note: The iSight cable has an eyelet through which passes the left-most screw in these pictures. |