Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #5

Edit by Marty Rippens

Edit approved by Marty Rippens

Before
After
Unchanged

Step Lines

[* black] Leave the previously used tool wedged in the device.
[* black] Insert another [product|IF145-335-2]plastic opening tool into the bottom of the left side, as shown.
[* black] Insert another [product|IF145-335-2]plastic opening tool into the bottom of the left side, as shown.
[* black] Using a similar procedure to the last step, run the tool along the side and widen the front panel-back panel gap. This time, run the device from bottom to top.
[* black] Repeat this process for the right side of the device, starting at the bottom of the right side.
[* icon_note] Some of the other tools that you wedged in may pop out. Simply wedge them back in where they were previously, and continue.