Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #5

Edit by Peter Van Ausdeln

Edit approved by Peter Van Ausdeln

Before
After
Unchanged

Step Lines

[* black] Leave the previously used tool wedged intoin the device.
[* black] Insert another opening tool into the bottom of the left sideside, as shown.
[* black] WidenUsing a similar procedure to the last step, widen the gap,gap and run the tool along the side. This time, run the device from bottom to top.
[* black] Repeat this process for the right side of the devicedevice, starting at the bottom of the right side.
[* icon_note] Some of the other tools that you wedged in may pop out. Simply place them back in where you previously put themthey were previously, and continue.
[* black] Leave the previously used tool wedged intoin the device.
[* black] Insert another opening tool into the bottom of the left sideside, as shown.
[* black] WidenUsing a similar procedure to the last step, widen the gap,gap and run the tool along the side. This time, run the device from bottom to top.
[* black] Repeat this process for the right side of the devicedevice, starting at the bottom of the right side.
[* icon_note] Some of the other tools that you wedged in may pop out. Simply place them back in where you previously put themthey were previously, and continue.