Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #5

Edit by Peter Van Ausdeln

Edit approved by Peter Van Ausdeln

Before
After
Unchanged

Step Lines

[* black] Wedge one moreLeave the previously used tool wedged into the device.
[* black] Insert another
opening tool into the opening, on a side where there is no other toolbottom of the left side.
[* black] Holding firmly to that tool, slide itWiden the gap, and run the tool along the side that it is edged into. Take careside. This time, run the device from bottom to keep it wedged intop.
[* black] Repeat this process for the right side of
the device.
[* icon_remindericon_note] Some of the other tools that you wedged in may pop out. Simply place them back in where you previously put them, and continue.
[* black] Wedge one moreLeave the previously used tool wedged into the device.
[* black] Insert another
opening tool into the opening, on a side where there is no other toolbottom of the left side.
[* black] Holding firmly to that tool, slide itWiden the gap, and run the tool along the side that it is edged into. Take careside. This time, run the device from bottom to keep it wedged intop.
[* black] Repeat this process for the right side of
the device.
[* icon_remindericon_note] Some of the other tools that you wedged in may pop out. Simply place them back in where you previously put them, and continue.