Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Peter Van Ausdeln

Edit approved by Peter Van Ausdeln

Before
After
Unchanged

Step Lines

[* black] Wedge aan [product|IF145-335-2] between the displayfront and the back panel, on the bottom right corner.
[* black] UseSlowly push the tool down to make a small gap between the front panel and the back panel.
[* black] WithHolding the tool still wedged insteady, run the tool along the bottom part of the devicedevice from right to left. This will make the gap between the front panel and the back panel bigger.
[* icon_caution] Do notWhen wedging your tool into the device, make sure to apply too muchthe pressure to the screen when wedging your tools intoand device at a slow but steady speed to the devicescreen. Too much pressure too fast can crack the screen.
[* black] Wedge aan [product|IF145-335-2] between the displayfront and the back panel, on the bottom right corner.
[* black] UseSlowly push the tool down to make a small gap between the front panel and the back panel.
[* black] WithHolding the tool still wedged insteady, run the tool along the bottom part of the devicedevice from right to left. This will make the gap between the front panel and the back panel bigger.
[* icon_caution] Do notWhen wedging your tool into the device, make sure to apply too muchthe pressure to the screen when wedging your tools intoand device at a slow but steady speed to the devicescreen. Too much pressure too fast can crack the screen.