Skip to main content

Changes to Step #13

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following two screws securing the LVDSdisplay data cable bracket to the upper case:
[* black] Remove the following two screws securing the LVDSdisplay data cable bracket to the upper case:
[* red] One 7mm Phillips screw.
[* orange] One 5mm Phillips screw.
[* yellow] Remove the two 7 mm Phillips screws from the DC-in board.
[* black] Lift the LVDSdisplay data cable bracket out of the upper case.
[* black] Lift the LVDSdisplay data cable bracket out of the upper case.