Skip to main content

Changes to Step #7

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch


Step Lines

[* black] Bring the front wheel into the right position between the dropouts and slide the axle with open quick-release lever from the left side through the drop-out and the hub.
+[* black] As soon as the axle thread engages with the thread of the right fork leg, close it by turning clockwise. Tighten the axle a little and then release it by about a third of a turn.
+[* black] If the lever cannot be closed completely, re-open it and turn the axle a little anti clockwise.
+ [* icon_caution] In its end position the quick-release lever should be tight so that it can no longer be turned. The best closing position is in nearly upright position in front of the lower fork leg.