Skip to main content

Changes to Step #5

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch


Step Lines

-[title] Saddle montage
[* black] Loosen all screws of the hangers along the frame which hold the saddle cable.
[* black] Bring the front end with the switch to the bar by pulling it through the hangers along the frame. Take care of the other cables around your bar.
[* black] Position the lever on the right side of your bar and tighten it's screw loosely. Afterwards bring it into a comfortable position for your riding stance and tighten its bolt with the torque wrench to 5-6 Nm.