Skip to main content

Changes to Step #4

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch


Step Lines

-[title] saddle montage
+[title] Saddle montage
[* black] Attaching the saddle to the frame is a piece of cake. Take the saddle and apply assembly paste to the bottom part of the seat post, around the clamping area of it and inside the seat tube.
[* black] Slide the saddle into the seat tube while pulling out the cable at the lower end of the tube.
[* icon_caution] Note the minimum and maximum height markings on the seat post.
[* black] Tighten the bolt of the clamp with the torque wrench and you're good.