Skip to main content

Changes to Step #2

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

[title] Bar montage
-[* black] The very first step to mount the bar is to loosen the bolts of the stem with the torque wrench and to remove its faceplate completely.
-[* black] After that take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.
+[* black] Loosen the bolts of the stem with the torque wrench and to remove its faceplate completely.
+[* black] Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.