Skip to main content

Changes to Step #2

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

[title] bar montage
-[* black] loosen screws
-[* black] remove front
-[* black] use assembly paste
+[* black] The very first step to mount the bar is to loosen the bolts of the stem with the torque wrench and to remove the faceplate of it completely.
+[* black] After that take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body