Skip to main content

Changes to Step #17

Edit by Jamie Carrington

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] We loosen a pair of Phillips screws to access the LightingLightning connector, pop its press connector off the back of the logic board, and seconds later it's free to leave this plastic mess behind.
[* black] We loosen a pair of Phillips screws to access the LightingLightning connector, pop its press connector off the back of the logic board, and seconds later it's free to leave this plastic mess behind.
[* black] Luckily, the Lightning port is modular—so if you wear your port out, all you have to do is utterly destroy the case to replace that component.
[* icon_note] The logic board is secured with a lot of sticky tape.