Skip to main content

Changes to Step #14

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_note] Attachblack] To solder the red lead first, followed by the white lead, and finish withnew leads to the black lead.
[* black] Place
board, place the wire from the new batterybare end of one lead onto the newbead of solder on its corresponding solder beadpad.
[* icon_note] Attachblack] To solder the red lead first, followed by the white lead, and finish withnew leads to the black lead.
[* black] Place
board, place the wire from the new batterybare end of one lead onto the newbead of solder on its corresponding solder beadpad.
[* black] Press the tip of the soldering iron onto the solder bead until it melts.
[* black] Slide the wireexposed end of the lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.
[* black] Continue with the other two connections the same way, taking special care not to solder two of the connectorspads together.
[* black] Slide the wireexposed end of the lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.
[* black] Continue with the other two connections the same way, taking special care not to solder two of the connectorspads together.