Skip to main content

Changes to Step #12

Edit by Mark

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_note] We recommend that you clean the surface-mount solder pads with a soft cloth or sponge and a small amount of rubbing alcoholalcohol (≥ 90%).
[* icon_note] We recommend that you clean the surface-mount solder pads with a soft cloth or sponge and a small amount of rubbing alcoholalcohol (≥ 90%).
[* black] To melt a small bead of solder onto each solder pad:
[* black] Place the tip of the soldering iron against the solder pad.
[* black] Melt solder so that it forms a dome on top of the pad.
[* black] Remove both the solder and the soldering iron tip from the solder pad as soon as enough solder melts onto the pad.