Skip to main content

Changes to Step #12

Edit by Miroslav Djuric

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_note] We recommend that you clean the exposed surface of the boardsurface-mount solder pads with a soft cloth or sponge and a small amount of rubbing alcohol.
[* black] MeltTo melt a small bead of solder onto each solder pad by placingpad:
[* black] Place
the tip of the soldering iron onagainst the solder pad, pressingpad.
[* black] Melt
solder intoso that it forms a dome on top of the connection (melting it), and quickly removingpad.
[* black] Remove
both the solder and the tip of the soldering iron tip from the board.
[* black] Once a small amount of
solder has meltedpad as soon as enough solder melts onto the board, lift the solder away first and then the soldering ironpad.
[* icon_note] We recommend that you clean the exposed surface of the boardsurface-mount solder pads with a soft cloth or sponge and a small amount of rubbing alcohol.
[* black] MeltTo melt a small bead of solder onto each solder pad by placingpad:
[* black] Place
the tip of the soldering iron onagainst the solder pad, pressingpad.
[* black] Melt
solder intoso that it forms a dome on top of the connection (melting it), and quickly removingpad.
[* black] Remove
both the solder and the tip of the soldering iron tip from the board.
[* black] Once a small amount of
solder has meltedpad as soon as enough solder melts onto the board, lift the solder away first and then the soldering ironpad.