Skip to main content

Changes to Step #12

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_note] We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol.
[* black] Melt a small bead of solder bead directly onto the metal connector on the boardeach solder pad by placing the solderingtip of the iron ontoon the solder pad, pressing solder into the metal connectorconnection (melting it), and then pressingquickly removing both the solder againstand the tip andof the soldering iron from the board.
[* black] Melt a small bead of solder bead directly onto the metal connector on the boardeach solder pad by placing the solderingtip of the iron ontoon the solder pad, pressing solder into the metal connectorconnection (melting it), and then pressingquickly removing both the solder againstand the tip andof the soldering iron from the board.
[* black] Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron.