Skip to main content

Changes to Step #10

Edit by Miroslav Djuric

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] To solder each connection:
[* black] Place the tip of the soldering iron against the solder pad.
[* black] Melt just enough solder onto the solder pad so that the capacitor's contact lead holdsleads hold firmly in place.
[* black] Melt just enough solder onto the solder pad so that the capacitor's contact lead holdsleads hold firmly in place.
[* black] Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad.