Skip to main content

Changes to Step #10

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereSolder each lead by momentarily placing the tip of the soldering iron against the connection, pressing solder into the connection (melting it), and quickly removing both the solder and the tip of the soldering iron from the connection. The solder should flow around each lead, solidly connecting it to the pad on the logic board.
[* black] Insert wisdom hereSolder each lead by momentarily placing the tip of the soldering iron against the connection, pressing solder into the connection (melting it), and quickly removing both the solder and the tip of the soldering iron from the connection. The solder should flow around each lead, solidly connecting it to the pad on the logic board.