Skip to main content

Changes to Step #5

Edit by Miroslav Djuric

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert the clean contacts into the open holes through thethru-hole solder pads.
[* icon_note] To ease in soldering, it is often beneficial toslightly bend the contacts protruding through the holes so they hold themselves in place. In ourIn this case, we bent the tips of the contacts away from each other so the capacitor wouldwill hold itself in position during soldering.
[* black] ~~ What's up with the second picture ~~
[* black] Insert the clean contacts into the open holes through thethru-hole solder pads.
[* icon_note] To ease in soldering, it is often beneficial toslightly bend the contacts protruding through the holes so they hold themselves in place. In ourIn this case, we bent the tips of the contacts away from each other so the capacitor wouldwill hold itself in position during soldering.
[* black] ~~ What's up with the second picture ~~