Skip to main content

Changes to Step #5

Edit by Miroslav Djuric

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert the contacts into thru-hole solder pads.
[* icon_noteblack] To ease in soldering, slightly bend the contacts protruding through the holes so they hold themselves in place. In this case, the capacitor will hold itself in position during soldering.
[* black] ~~ What's up with the second picture ~~
[* icon_noteblack] To ease in soldering, slightly bend the contacts protruding through the holes so they hold themselves in place. In this case, the capacitor will hold itself in position during soldering.
[* black] ~~ What's up with the second picture ~~

Image 2

Deleted