Skip to main content

Changes to Step #3

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereWhen the tool has completely passed through the hole after pressing from the opposite side of the board, enlarge the hole by heating the top side of the solder pad while pressing through with the tool.
[* icon_note] Both solder holes should now be open enough to insert the bare leads of your component
.
[* black] Insert wisdom hereWhen the tool has completely passed through the hole after pressing from the opposite side of the board, enlarge the hole by heating the top side of the solder pad while pressing through with the tool.
[* icon_note] Both solder holes should now be open enough to insert the bare leads of your component
.

Image 1

Old Version

New Version

Image 2

No previous image

Added