Skip to main content

Changes to Step #1

Edit by Phillip Takahashi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Remove the 4 Torx screws securing the heat sink.
[* black] Gently lift the heat sink from side indicated in the picture.
[* icon_note] The heat sink may feel like it is "glued" to the chips because of the thermal paste.
[* icon_note] Be sure to thuroughly clean off the old thermal paste and apply new thermal paste before reinstalling the heat sink. Follow our [guide|744|thermal paste guide] for detailed instructions.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added