Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Phillip Takahashi

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert the flat end of a spudger into the slot on the right side of the Center Control Covercenter control cover and pry it up.
[* black] Insert the flat end of a spudger into the slot on the right side of the Center Control Covercenter control cover and pry it up.
[* black] Carefully pull the center control cover up along its edges.
[* icon_caution] Do not attempt to completely remove the cover, as it is still attached via a ribbon cable.