Skip to main content

Changes to Step #3

Edit by Chase Mamatey

Edit approved by Chase Mamatey

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Lift the camera body out of the plastic frame by using two small plastic opening tools as follows:
+[* red] Place one opening tool directly under the base of the camera ribbon cable and camera body, applying upward pressure.
+[* orange] At the same time, use the other tool to release one of the clips on the left or the right of the camera body.
+ [* icon_note] The left side of the camera body is shown here as the top, with the right side shown as the bottom.

Image 1

Old Version

New Version