Skip to main content

Changes to Step #4

Edit by Yang Zhao

Edit approved by Yang Zhao

Deleted
Added
Unchanged

Step Lines

[title] Install new diode
[* icon_reminder] Make sure to test the new diode before installing it.
[* black] Apply some solder to the pads.
[* icon_caution] Note the bar marking on the diode which indicates its orientation. The bar should be pointing '''towards the antenna'''.
[* black] Hold the new diode in place using tweezers. While applying slight downward force, apply heat to a pad until the solder melts and joins to the lead. Repeat with the other lead.
[* icon_caution] Note the marking on the diode which indicates its orientation. The bar must be pointing '''towards the antenna'''.