Skip to main content

Changes to Step #1

Edit by Yang Zhao

Edit approved by Yang Zhao

Deleted
Added
Unchanged

Step Lines

[title] Open the UAP-AC-LITE
[* red] The front cover is secured by 5 tabs.
[* black] InsertWork the Jimmy ininto the space near a clip, and create a big enough gap to insert a prying tool. Moderate pressure shouldfrom a prying tool should force the clips open.
[* black] InsertWork the Jimmy ininto the space near a clip, and create a big enough gap to insert a prying tool. Moderate pressure shouldfrom a prying tool should force the clips open.
[* black] There are a number of alignment tabs that can get in the way. It is best to try and work the Jimmy towards the center of the front cover, hugging its inside surface.
[* black] The PCB is held down by 3 screws. It is not necessary to remove the board for this repair.