Skip to main content

Changes to Step #4

Edit by Alejandro Guerra Piol

Edit approved by Alejandro Guerra Piol

Before
After
Unchanged

Step Lines

-[* black] Using a Philips 1 screw driver, remove the screw marked in a red circle.
-[* icon_note] The screw is a Phillips 1 (PH 1) with a length of 40 millimeters (mm)
+[* red] Using a Philips 1 screw driver, remove the screw marked in a red circle.
+ [* icon_note] The screw is a Phillips 1 (PH 1) with a length of 40 millimeters (mm)
[* icon_caution] Do not use too much force on the screw driver, you might damage the screw.
-[* black] Using your hands carefully unplug the cords marked in a red square.
+[* green] Using your hands, carefully unplug the cords marked in a green square.

Image 1

Old Version

New Version