Skip to main content

Changes to Step #7

Edit by Isaac

Edit approved by Isaac

Deleted
Added
Unchanged

Step Lines

[* black] Flip motherboard over.
[* icon_notered] Directly underneath the USB Charging connector will be four solder points the need to be undone to remove the charging port.
[* icon_notered] Directly underneath the USB Charging connector will be four solder points the need to be undone to remove the charging port.
[* black] Insert new port with correct orientation and apply new solder to attach port to motherboard.
[* icon_caution] Due to high heat motherboard can be damaged if heat sink is not used.