Skip to main content

Changes to Step #18

Edit by CChin

Edit approved by Sam Omiotek

Before
After
Unchanged

Step Lines

+[* black] IC Identification, pt. 3:
+ [* red] Texas Instruments [link|https://www.ti.com/product/TMP513|TMP513A] triple remote/local temperature sensor
+ [* orange] Winbond [link|https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q80DV|W25Q80DVUXIE] 8 Mb serial NOR flash memory
+ [* yellow] Winbond [link|https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25X20CL|W25X20CLUXIG] 2 Mb serial NOR flash memory
+ [* green] Microchip (formerly Atmel) [link|https://www.microchip.com/wwwproducts/en/AT93C66B|AT93C66B] 4 Kb serial EEPROM memory
+ [* light_blue] Maxim Integrated [link|https://www.maximintegrated.com/en/products/power/switching-regulators/MAX77596.html|MAX77596] 300 mA buck converter
+ [* blue] Texas Instruments [link|https://www.ti.com/product/TPS22966|TPS22966] 6 A load switch
+ [* violet] Likely hall sensor

Image 1

No previous image

Added

Image 2

No previous image

Added