Skip to main content

Changes to this Step

Edit by Keaton Frahmann

Edit approved by Keaton Frahmann

Before
After
Unchanged

Step Lines

[* blackred] The fan affixed to the back plate is still connected to the logic board. A small wire must be detached to fully remove the back plate.
[* red]
Simply pull the base of the wire closest to the logic board and the connector will pop out.
[* blackred] The fan affixed to the back plate is still connected to the logic board. A small wire must be detached to fully remove the back plate.
[* red]
Simply pull the base of the wire closest to the logic board and the connector will pop out.