Skip to main content

Changes to Step #5

Edit by Aaron Morland

Edit approved by Aaron Morland

Deleted
Added
Unchanged

Step Lines

[* black] Locate the two orange ribbon cable ports in the bottom left hand side of the case.
[* black] Place a plastic prying tool under the black plastic tab on one of the ribbon cable ports.
[* black] Pry upward until the black tab moves 90 degrees, and gently pull the ribbon cable out of the port.
[* black] Repeat the first three bullets onprevious process to remove the secondother ribbon cable.
[* black] Repeat the first three bullets onprevious process to remove the secondother ribbon cable.