Skip to main content

Changes to Step #4

Edit by Aaron Morland

Edit approved by Aaron Morland

Deleted
Added
Unchanged

Step Lines

[* black] Locate the orange ribbon cable port on the screen portion of the device.
[* black
red] Place a plastic pryingopening tool under the black plastic tab that is on the opposite side of the port as the ribbon cable.
[* black] Locate the orange ribbon cable port on the screen portion of the device.
[* black
red] Place a plastic pryingopening tool under the black plastic tab that is on the opposite side of the port as the ribbon cable.
[* black] Pry upward until the black tab moves 90 degrees, and gently pull the ribbon cable out of the port.

Image 1

Old Version

New Version