Skip to main content

Changes to Step #2

Edit by Marty Rippens

Edit approved by Marty Rippens

Deleted
Added
Unchanged

Step Lines

[* red] Insert the plastic pryingopening tool into the seam near the corner of the device.
[* red] Insert the plastic pryingopening tool into the seam near the corner of the device.
[* orange] Slowly slide the tool around the perimeter of the device, gradually prying up the screen.
[* icon_note] It is normal to hear snaps as the spring clips holding the screen in place are released.
[* icon_note] It is also normal to hear adhesive separating, as a small amount is used to help secure the screen.