Skip to main content

Changes to Step #2

Edit by Elaina Ryan

Edit approved by Elaina Ryan

Deleted
Added
Unchanged

Step Lines

[* black] Separate the screen from its case by insertingInsert the plastic prying tool into the seam near the corner of the device.
[* black] Separate the screen from its case by insertingInsert the plastic prying tool into the seam near the corner of the device.
[* black] Slowly slide the tool around the perimeter of the device, gradually prying up the screen.
[* icon_note] It is normal to hear snaps as the spring clips holding the screen in place are releasedreleased.
[* icon_note] It is normal to hear snaps as the spring clips holding the screen in place are releasedreleased.
[* icon_note] It is also normal to hear adhesive separating, as a small amount is used to help secure the screen.