Skip to main content

Changes to Step #2

Edit by Aaron Morland

Edit approved by Aaron Morland

Deleted
Added
Unchanged

Step Lines

[* black] Separate the screen from its case by inserting the plastic prying tool into the seam near the corner of the device.
[* black] Slowly slide the tool around the perimeter of the device, gradually prying up the screen.
[* icon_note] It is normal to hear snaps as the spring clips holding the screen in place are released
[* icon_note] It is also normal to hear adhesive separating, as a small amount is used to help secure the screen.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added