Skip to main content

Changes to Step #2

Edit by Aaron Morland

Edit approved by Aaron Morland

Deleted
Added
Unchanged

Step Lines

[* blackred] Insert the plastic prying tool into the seam near the corner of the device.
[* blackorange] Slowly slide the tool around the perimeter of the device, gradually prying up the screen.
[* blackred] Insert the plastic prying tool into the seam near the corner of the device.
[* blackorange] Slowly slide the tool around the perimeter of the device, gradually prying up the screen.
[* icon_note] It is normal to hear snaps as the spring clips holding the screen in place are released.
[* icon_note] It is also normal to hear adhesive separating, as a small amount is used to help secure the screen.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version