Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Lift the home button connector to the right to disconnect it from its socket on the interconnect cable.
+[* black] Pry under the left edge of the home button cable connector to disconnect it from its socket.
+ [* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.