Skip to main content

Changes to Step #1

Edit by silas

Edit declined by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[* black] Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
[* red] One 1.1 mm screw
[* orange] Three 1.3 mm screws
+[* icon_reminder] These screws can be challenging to remove. If a screw is not loosening, apply more pressure and try again. This will prevent damage to the screw head.
[* icon_reminder] During reassembly, be careful not to overtighten these screws, or your home button may not work.