Skip to main content

Changes to Step #8

Edit by Kelvin Cao

Edit approved by Kelvin Cao

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Be careful of the aluminum foil tape, as it is very fragile and can easily rip.
[*
black] Insert wisdom hereCarefully lift up the aluminum foil tape with your fingers so that the ribbon connector reveals itself.
[* icon_caution] Do not try to pull the ribbon cables off the screen as there is a plastic piece surrounding the ribbon cables glued onto the metal display.
[* black] Firmly press the two switches located on the sides of the connector and disconnect the connector from its connections. Leave it disconnected but still intact with the metal display.
[* black] Use a blue plastic prying toll and carefully push it underneath the grey plastic case surrounding the ribbon cable.
[* black] Apply a downward force and carefully peel the grey plastic off of the metal display
.
[* icon_caution] Be careful of the aluminum foil tape, as it is very fragile and can easily rip.
[*
black] Insert wisdom hereCarefully lift up the aluminum foil tape with your fingers so that the ribbon connector reveals itself.
[* icon_caution] Do not try to pull the ribbon cables off the screen as there is a plastic piece surrounding the ribbon cables glued onto the metal display.
[* black] Firmly press the two switches located on the sides of the connector and disconnect the connector from its connections. Leave it disconnected but still intact with the metal display.
[* black] Use a blue plastic prying toll and carefully push it underneath the grey plastic case surrounding the ribbon cable.
[* black] Apply a downward force and carefully peel the grey plastic off of the metal display
.