Skip to main content

Changes to Step #5

Edit by Kelsea Weber

Edit approved by Kelsea Weber

Deleted
Added
Unchanged

Step Lines

[* black] With the flat end of a spudger, flip up the black flap ofon the display's ZIF connector.
[* black] Insert the pointed end of the spudger between the cable and the motherboard and gently pull toward yourselfthe cable straight out of the connector.
[* black] With the flat end of a spudger, flip up the black flap ofon the display's ZIF connector.
[* black] Insert the pointed end of the spudger between the cable and the motherboard and gently pull toward yourselfthe cable straight out of the connector.
[* icon_reminder] During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap.