Skip to main content

Changes to Step #2

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom here.Remove the following four screws securing the cable cover to the logic board:
[* red] One 2.7 mm Phillips screw
[* orange] One 2.6 mm Phillips screw
[* yellow] One 1.3 mm Phillips screw
[* green] One 1.2 mm Phillips screw
[* black] Insert wisdom here.Remove the following four screws securing the cable cover to the logic board:
[* red] One 2.7 mm Phillips screw
[* orange] One 2.6 mm Phillips screw
[* yellow] One 1.3 mm Phillips screw
[* green] One 1.2 mm Phillips screw

Image 1

Old Version

New Version