Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Use a plastic opening tool to gently detachpry up the battery connector from theits socket on the logic board. Start lifting off the connector from the bottom side, by placing
[* black] Place
the tip of the tool between the loudspeaker enclosure and the metal cover of the connectorconnector, and lift the bottom edge of the connector first.
[* black] Use a plastic opening tool to gently detachpry up the battery connector from theits socket on the logic board. Start lifting off the connector from the bottom side, by placing
[* black] Place
the tip of the tool between the loudspeaker enclosure and the metal cover of the connectorconnector, and lift the bottom edge of the connector first.
[* icon_note] The battery connector comes off vertically from the logic board. Do not apply force sideways.
[* icon_caution] Be careful not to rip offpry at the battery connector socket soldered onitself, or it may detach from the logic board. There are 4four very small solderingsolder points awaiting this mistake!
[* icon_caution] Be careful not to rip offpry at the battery connector socket soldered onitself, or it may detach from the logic board. There are 4four very small solderingsolder points awaiting this mistake!