Fix Your Stuff Community Store

Changes to Step #1

Edit by jg44070 —

Edit declined by Jake Devincenzi

Before
After
Unchanged

Step Lines

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw.
[* black] Use a plastic opening tool to gently detach the battery connector from the device.
-[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This may come loose while prying the battery connector from its socket.
+[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This will come loose while prying the battery connector from its socket.