Skip to main content

Changes to Step #1

Edit by Eric H

Edit declined by Walter Galan

Before
After
Unchanged

Step Lines

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw.
-[* black] Use a plastic opening tool to gently detach the battery connector from the device.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This may come loose while prying the battery connector from its socket.

Image 2

Old Version

New Version

Image 3

Deleted